 
|
- VSM-2.0-1Ch is the high
performance server system that transmits
the high definition video & audio
in real time. - VSM-2.0-1Ch supports not only SD
but also HD resolution that supports
megapixel camera. - VSM-2.0-1Ch is implemented by
H.264 & JPEG compression technology over
the IP Network such as ADSL, VPN, they provide
the optimal video transmission quality with
their highly effective video compression
features and more increased adaptability
to the existing networks. - H.264 provide more than 50%
increased compression capacity, under the
same conditions. Therefore, they allow you
to transmit the high resolution video data,
even with a lower bandwidth |
Sections |
Specifications |
Descriptions |
Model |
VSM-2.0-1Ch |
|
System |
Operating
System |
Embedded
Linux |
|
Main
Memory |
128Mbyte
DDR2 |
|
Flash |
128Mbyte
NAND FLASH |
|
Video |
Algorithm |
H.264/JPEG
Encoding/Decoding |
H.264/AVC
MP/L4 |
Input |
1
x HMDI type A, HDMI RX |
|
1
x BNC, Composite or HD SDI |
HD
SDI : Option |
Output |
1
x HMDI type A, HDMI TX |
|
1
x BNC, Composite or HD SDI |
HD
SDI : Option |
Resolution |
1920x1080/30p
~ CIF/30fps |
18
Resolution Steps |
Bitrate |
32Kbps
~ 10 Mbps |
|
Audio |
Algorithm |
G.711 |
|
Input |
1
x 35mm JACK, LINE IN |
Single
Mono |
Output |
1 x 35mm JACK, LINE OUT |
Single
Mono |
Sample Rate |
8KHz |
|
Bitrate |
64Kbps
|
|
Sensor /
Alarm
|
Sensor
Input |
2
x Input (3 x Terminals) |
Default
NO,
2xSensor In, 1xGND |
Alarm
Output |
2
x Input (4 x Terminals) |
Default
No,
2xNO, 1xGND |
Network |
RS232 |
1
x Port (3 x Terminals) |
|
RS422/485 |
1
x Port (4 x Terminals) |
Camera
PTZ Control |
LAN |
1
x RJ45, 10/100M Ethernet |
|
Storage
|
External
Backup |
1
x USB 2.0 Interface |
|
Security |
|
Yes |
|
Event |
Motion
Detection |
Yes |
|
Sensor |
Yes |
|
Pre/Post Alarm |
Yes
|
|
Camera Control |
PTZ |
Various
Protocol supported |
|
Preset |
Supported
for Specific Camera |
|
Notify |
|
Alarm / E-mail |
|
Network |
|
TCP/IP, Multicast, HTTP, SMTP, FTP,
DHCP, DNS, Dynamic DNS, RTP, RTSP |
|
Language |
|
Korean
/ English |
|
Power |
Input
|
2.5ик
Power Jack, 12V/0.5A |
|
External
Power Adaptor |
Output
: 12V/1.5A,
Input : AC100V~220V |
|
PoE |
802.2af
Compatible |
|
Certification |
Overseas
: CE, FCC, RoHS Domestic : MIC |
|
General |
4
x System Status LED |
POWER/STATUS
/LINK/TRX |
2
x PHY Status LED |
PHY
LINK/100M |
1
x Default Setting Button |
|
|